Takumi 700CF Par Yuri Katom, Posts du concepteur inside
- Patrick66
- Armageddon
- Messages : 20536
- Enregistré le : 17 avr. 2012, 18:21
- Localisation : Torreilles (66)
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Plus de nouvelles de ce 700, dommage
KDS innova 450 SD FBL - Module Ebar - Spektrum DX9 / Photos & Vidéos
T-rex 500e PRO DFC - Module Ebar - Spektrum DX9 / Photos & Vidéos
T-rex 700e PRO DFC HV - Speed fuselage - Ebar V² - DX9 / Photos & Vidéos
Phoenix rc - TX Spektrum DX9 / Station de charge
T-rex 500e PRO DFC - Module Ebar - Spektrum DX9 / Photos & Vidéos
T-rex 700e PRO DFC HV - Speed fuselage - Ebar V² - DX9 / Photos & Vidéos
Phoenix rc - TX Spektrum DX9 / Station de charge
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Ça va venir. Yuri ne va pas laisser tomber si proche du but...
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
- Patrick66
- Armageddon
- Messages : 20536
- Enregistré le : 17 avr. 2012, 18:21
- Localisation : Torreilles (66)
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Je n'en doute pas une seconde, j'aurai juste aimé quelques nouvelles !
KDS innova 450 SD FBL - Module Ebar - Spektrum DX9 / Photos & Vidéos
T-rex 500e PRO DFC - Module Ebar - Spektrum DX9 / Photos & Vidéos
T-rex 700e PRO DFC HV - Speed fuselage - Ebar V² - DX9 / Photos & Vidéos
Phoenix rc - TX Spektrum DX9 / Station de charge
T-rex 500e PRO DFC - Module Ebar - Spektrum DX9 / Photos & Vidéos
T-rex 700e PRO DFC HV - Speed fuselage - Ebar V² - DX9 / Photos & Vidéos
Phoenix rc - TX Spektrum DX9 / Station de charge
-
- Caporal
- Messages : 26
- Enregistré le : 28 août 2015, 19:39
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Yes giving up is not an option
belts are arriving soon
hoping to have a test flight in a week from now
not much news
in the mean time did a little change to the main frame to make it easier to manufacture
but it looks about the same
i would post an image here if i knew how
does anybody know how to post images over here?
belts are arriving soon
hoping to have a test flight in a week from now
not much news
in the mean time did a little change to the main frame to make it easier to manufacture
but it looks about the same
i would post an image here if i knew how
does anybody know how to post images over here?
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Yes Yuri. You have to use a website which will host your picture.
Try http://www.hostingpics.net or http://www.heberger-images.fr.
Then upload your photo and copy the link using the URL icon.
Or even easier, use Tapatalk, take a photo using your mobile phone and then use Tapatalk in order to load the picture.
Oui Yuri. Il faut utiliser un site internet hébergeur d'images ou Tapatalk pour charger la photo,
Try http://www.hostingpics.net or http://www.heberger-images.fr.
Then upload your photo and copy the link using the URL icon.
Or even easier, use Tapatalk, take a photo using your mobile phone and then use Tapatalk in order to load the picture.
Oui Yuri. Il faut utiliser un site internet hébergeur d'images ou Tapatalk pour charger la photo,
Modifié en dernier par fabu74 le 07 sept. 2015, 09:32, modifié 1 fois.
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
- Yoy24
- Armageddon
- Messages : 23299
- Enregistré le : 29 juin 2010, 15:33
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
¨¨¨¨¨¨ - Vaucluse - - Compy300 - - Atom 500 - ¨¨¨¨¨¨
----------------- Hitec Aurora 9X Mode2- -Héli-X 6.1-
----------------------------The Meeting Heli4 2013/14/15..., j'y étais!!! ------------------------------
----------------- Hitec Aurora 9X Mode2- -Héli-X 6.1-
----------------------------The Meeting Heli4 2013/14/15..., j'y étais!!! ------------------------------
-
- Caporal
- Messages : 26
- Enregistré le : 28 août 2015, 19:39
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
thank you for the help friends
i never used forums before, extremely busy to google search how to use forums
its 3am here in Canada and i am still making parts
ok so i uploaded the pic
lets see if i did it right...
[/url]
i never used forums before, extremely busy to google search how to use forums
its 3am here in Canada and i am still making parts
ok so i uploaded the pic
lets see if i did it right...
[/url]
je vous remercie pour les amis d'aide
jamais utilisé forums avant, très occupé à la recherche google comment utiliser les forums: huh:
son trois heures ici au Canada et je suis encore la fabrication de pièces
ok donc je téléchargé le pic
Voyons si je l'ai fait à droite ...
By yoy
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Thanks Yuri. You did it.
I'm really interested to see how the motor is fixed...
Merci Yuri. Tu as réussi.
Je suis très intéressé de voir comment tu as fixé le moteur...
I'm really interested to see how the motor is fixed...
Merci Yuri. Tu as réussi.
Je suis très intéressé de voir comment tu as fixé le moteur...
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
- fredolabidouille
- DETRAQUEUR
- Messages : 8984
- Enregistré le : 04 sept. 2013, 10:31
- Localisation : BRETAGNE
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
well done Yuri, I can see your picture !
OMG, this piece is a real piece of art
-----------------------------------------------------------------------------
[bien joué Yuri, on voit la photo !
cette piece est une véritable oeuvre d'art ]
OMG, this piece is a real piece of art
-----------------------------------------------------------------------------
[bien joué Yuri, on voit la photo !
cette piece est une véritable oeuvre d'art ]
T-rex 150 - Blade 180 cfx - OXY3
GAUI X2.1 - GAUI X3 - GAUI X5
neXt - Devo 8s deViation
-------------------------------------------------------------------------
canopys T-rex150 viewtopic.php?f=252&t=57267&hilit=canop ... #p10183589
canopys 180CFX viewtopic.php?f=270&t=61721
-------------------------------------------------------------------------------------
-----------------------------the meeting Heli4 2015... j'y étais !!!--------------------------------------
-----------------------------the meeting Heli4 2016... j'y étais !!!-------------------------------------
- fredolabidouille
- DETRAQUEUR
- Messages : 8984
- Enregistré le : 04 sept. 2013, 10:31
- Localisation : BRETAGNE
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
apriori le moteur est fixé sur le capot supérieur de la "boite à pignons coniques"fabu74 a écrit :Je suis très intéressé de voir comment tu as fixé le moteur...
T-rex 150 - Blade 180 cfx - OXY3
GAUI X2.1 - GAUI X3 - GAUI X5
neXt - Devo 8s deViation
-------------------------------------------------------------------------
canopys T-rex150 viewtopic.php?f=252&t=57267&hilit=canop ... #p10183589
canopys 180CFX viewtopic.php?f=270&t=61721
-------------------------------------------------------------------------------------
-----------------------------the meeting Heli4 2015... j'y étais !!!--------------------------------------
-----------------------------the meeting Heli4 2016... j'y étais !!!-------------------------------------
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
C'est effectivement ce que je m'imagine mais très restreint comme accès.
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
-
- Caporal
- Messages : 26
- Enregistré le : 28 août 2015, 19:39
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
if you look at the rendered mechanics assembly that that i posted previously, that whole assembly is bolted to the fuselage with four bolts you can see two on each side of the fuselage
so if heli is assembled it takes to snap off the tail push rod, remove the tail belt and unscrew four bolts
then the whole mechanics of the helicopter are in your hand and separated from the fuselage
results in a very easy access to anything you wish
in this picture i marked with blue marker the location where the mechanics assembly is bolted to the fuselage
when i get a bit free time i will create an animation that will show the assembly of the whole helicopter that will clarify a lot regarding assembly and ease of access
i designed this heli first of all for myself, i wouldn't create myself a heli that i would need to suffer to be able to do any maintenance work
so if heli is assembled it takes to snap off the tail push rod, remove the tail belt and unscrew four bolts
then the whole mechanics of the helicopter are in your hand and separated from the fuselage
results in a very easy access to anything you wish
in this picture i marked with blue marker the location where the mechanics assembly is bolted to the fuselage
when i get a bit free time i will create an animation that will show the assembly of the whole helicopter that will clarify a lot regarding assembly and ease of access
i designed this heli first of all for myself, i wouldn't create myself a heli that i would need to suffer to be able to do any maintenance work
si vous regardez les mécaniciens rendus ensemble que ce i posté précédemment, que toute l'assemblée est boulonné sur le fuselage avec quatre boulons vous pouvez voir deux de chaque côté du fuselage
donc si hélicoptère est assemblé qu'il faut pour casser la tige de poussée queue, retirer la courroie de queue et dévisser les quatre boulons
Puis toute la mécanique de l'hélicoptère sont dans votre main et séparées du fuselage
résultats dans un accès très facile à tout ce que vous souhaitez: D
dans cette image i marqué avec un marqueur bleu de l'endroit où l'ensemble de la mécanique est boulonné sur le fuselage
quand je reçois un temps libre de peu, je vais créer une animation qui vous montrera l'ensemble de l'ensemble de l'hélicoptère qui permettra de clarifier beaucoup sur l'assemblage et la facilité d'accès
i conçu ce premier hélicoptère du tout pour moi, je ne voudrais pas me créer un hélicoptère que je devrais souffrir pour être en mesure de faire des travaux d'entretien: p
By yoy
- Le Docteur
- Armageddon
- Messages : 20338
- Enregistré le : 06 mars 2011, 18:45
- Contact :
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Cette machine est une horlogerie suisse !
Trop pour mon porte monnaie...
Trop pour mon porte monnaie...
Bien Amicalement,
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Thanks Yuri for sharing all this pictures. I can see now how the motor is fixed.
How do you handle the transmission from the main motor shaft to the belt below?
Merci Yuri pour le partage des photos. Je peux maintenant voir comment est fixé le moteur.
Comment est réalisé la transmission entre l'arbre du moteur et la poulie pour la courroie?
How do you handle the transmission from the main motor shaft to the belt below?
Merci Yuri pour le partage des photos. Je peux maintenant voir comment est fixé le moteur.
Comment est réalisé la transmission entre l'arbre du moteur et la poulie pour la courroie?
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
-
- Caporal
- Messages : 26
- Enregistré le : 28 août 2015, 19:39
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
welcome Fabu74 my pleasure
its a helical hardened steel bevel gears with an aluminum hub to make them lighter
its a helical hardened steel bevel gears with an aluminum hub to make them lighter
ses hélicoïdal endurcis engrenages coniques en acier avec un moyeu en aluminium pour les rendre plus léger
By yoy
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Ok so there is an helicoidal gear which should be good for the noice.
Now I imagine the pinion near of the engine. So really no issue having a long main shaft...
C'est donc une transmission helicoidale qui doit permettre un bruit doux.
Maintenant j'imagine très bien le pignon assez proche du moteur et à priori un moteur avec un arbre long ne devrait pas être un problème.
Now I imagine the pinion near of the engine. So really no issue having a long main shaft...
C'est donc une transmission helicoidale qui doit permettre un bruit doux.
Maintenant j'imagine très bien le pignon assez proche du moteur et à priori un moteur avec un arbre long ne devrait pas être un problème.
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
- fredolabidouille
- DETRAQUEUR
- Messages : 8984
- Enregistré le : 04 sept. 2013, 10:31
- Localisation : BRETAGNE
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Thank for those pictures Yuri !
personaly, what I'm wondering about is how you remove the belt befor removing the "mechanic" from the fuselage ?
I suppose it is from the tail shaft, but didn't saw any picture of the tail block
if you have time to, I'm curious about that part
thanks !
----------------------------------------------
merci pour les images, Yuri !
personnellement, la question que je me pose c'est comment retirer la courroie avant de retirer la partie mécanique du fuselage ?
je suppose que ça se fait à partir de l'axe d'AC, mais je n'ai pas vu d'images du bloc d'AC
si tu as le temps pour le faire, je suis curieux de voir cette partie
merci !
personaly, what I'm wondering about is how you remove the belt befor removing the "mechanic" from the fuselage ?
I suppose it is from the tail shaft, but didn't saw any picture of the tail block
if you have time to, I'm curious about that part
thanks !
----------------------------------------------
merci pour les images, Yuri !
personnellement, la question que je me pose c'est comment retirer la courroie avant de retirer la partie mécanique du fuselage ?
je suppose que ça se fait à partir de l'axe d'AC, mais je n'ai pas vu d'images du bloc d'AC
si tu as le temps pour le faire, je suis curieux de voir cette partie
merci !
T-rex 150 - Blade 180 cfx - OXY3
GAUI X2.1 - GAUI X3 - GAUI X5
neXt - Devo 8s deViation
-------------------------------------------------------------------------
canopys T-rex150 viewtopic.php?f=252&t=57267&hilit=canop ... #p10183589
canopys 180CFX viewtopic.php?f=270&t=61721
-------------------------------------------------------------------------------------
-----------------------------the meeting Heli4 2015... j'y étais !!!--------------------------------------
-----------------------------the meeting Heli4 2016... j'y étais !!!-------------------------------------
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
De ce que j'avais vu, je pense qu'il fait sauter la courroie d'AC par le devant. Il y a surement une poulie qui vient la tendre.
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
- fredolabidouille
- DETRAQUEUR
- Messages : 8984
- Enregistré le : 04 sept. 2013, 10:31
- Localisation : BRETAGNE
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
si c'est ça, ça doit pas être évident à enlever et encore plus à remettre en place
apparemment, la mécanique se place dans le châssis par l'avant. à moins qu'il n'y ait une découpe en dessous du chassis pour accéder à la poulie d'AC je ne vois pas bien comment procéder
apparemment, la mécanique se place dans le châssis par l'avant. à moins qu'il n'y ait une découpe en dessous du chassis pour accéder à la poulie d'AC je ne vois pas bien comment procéder
T-rex 150 - Blade 180 cfx - OXY3
GAUI X2.1 - GAUI X3 - GAUI X5
neXt - Devo 8s deViation
-------------------------------------------------------------------------
canopys T-rex150 viewtopic.php?f=252&t=57267&hilit=canop ... #p10183589
canopys 180CFX viewtopic.php?f=270&t=61721
-------------------------------------------------------------------------------------
-----------------------------the meeting Heli4 2015... j'y étais !!!--------------------------------------
-----------------------------the meeting Heli4 2016... j'y étais !!!-------------------------------------
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
J'ai rezieuté les photos et ça doit se faire depuis l'AC car c'est bien fermé à l'avant autour de la courroie d'AC.
Moi ce qui me perturbe c'est l'électricité statique car l'AC a l'air tout fermé.
Moi ce qui me perturbe c'est l'électricité statique car l'AC a l'air tout fermé.
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
- Stoparach
- Armageddon
- Messages : 19210
- Enregistré le : 13 déc. 2013, 20:04
- Localisation : Gignac-La-Nerthe
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Bah si ya aucune pièce plastique qui isole le tube de queue du châssis ça devrait pas être un problème...fabu74 a écrit :J'ai rezieuté les photos et ça doit se faire depuis l'AC car c'est bien fermé à l'avant autour de la courroie d'AC.
Moi ce qui me perturbe c'est l'électricité statique car l'AC a l'air tout fermé.
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Merci Sto. Alors je n'ai rien compris. Je croyais qu'il fallait un flux d'air pour évacuer l'électricité statique de la courroie.
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
- Stoparach
- Armageddon
- Messages : 19210
- Enregistré le : 13 déc. 2013, 20:04
- Localisation : Gignac-La-Nerthe
Takumi 700CF Par Yuri Katom, Posts du concepteur inside
J'ai lu qu'effectivement c'est l'étranglement du flux d'air au niveau de l'ac qui crée l'électricité statique. Mais le problème c'est surtout la différence de potentiel entre la queue et le châssis le problème... En cas de décharge brusque genre étincelle ça peut créer un coupure ou un réset du module ou de la réception. Le temps que ton module redémarre c'est le crash...
Un hélico est plein d'électricité statique. Le pire c'est les pales principales, le frottement avec l'air en produit énormément! Mais tants que toutes les paties sont chargées pareil ça pose pas de problème. Dès que l'hélico touche le sol ça se décharge, c'est pour ça qu'on prend pas de châtaigne quand on ramasse l'hélico... En tout cas c'est véridique pour les hélicos grandeur, ya pas de raison que ce soit différent pour nos modèles. Mais à plus petite échelle bien sûr!
Un hélico est plein d'électricité statique. Le pire c'est les pales principales, le frottement avec l'air en produit énormément! Mais tants que toutes les paties sont chargées pareil ça pose pas de problème. Dès que l'hélico touche le sol ça se décharge, c'est pour ça qu'on prend pas de châtaigne quand on ramasse l'hélico... En tout cas c'est véridique pour les hélicos grandeur, ya pas de raison que ce soit différent pour nos modèles. Mais à plus petite échelle bien sûr!
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Encore merci Sto. Ca commence à faire longtemps que j'ai fait ma prépa... et mon cerveau commence à ramolir...
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
- Yoy24
- Armageddon
- Messages : 23299
- Enregistré le : 29 juin 2010, 15:33
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Yop)
+1 Exactement Sto... et comme celui la est entièrement en carbone...pas de PB!!!
+1 Exactement Sto... et comme celui la est entièrement en carbone...pas de PB!!!
¨¨¨¨¨¨ - Vaucluse - - Compy300 - - Atom 500 - ¨¨¨¨¨¨
----------------- Hitec Aurora 9X Mode2- -Héli-X 6.1-
----------------------------The Meeting Heli4 2013/14/15..., j'y étais!!! ------------------------------
----------------- Hitec Aurora 9X Mode2- -Héli-X 6.1-
----------------------------The Meeting Heli4 2013/14/15..., j'y étais!!! ------------------------------
- Stoparach
- Armageddon
- Messages : 19210
- Enregistré le : 13 déc. 2013, 20:04
- Localisation : Gignac-La-Nerthe
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Une petite image complètement hors sujet pour illustrer... Oh les belles étincelles sur les pales!
- Le Docteur
- Armageddon
- Messages : 20338
- Enregistré le : 06 mars 2011, 18:45
- Contact :
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Ouah Sto, tu viens de m apprendre un truc de ouf. Merci !
Je savais pour l électricité statique mais j imaginais pas a ce point la
Je savais pour l électricité statique mais j imaginais pas a ce point la
Bien Amicalement,
- Yoy24
- Armageddon
- Messages : 23299
- Enregistré le : 29 juin 2010, 15:33
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
C'est aussi dans bien des cas, sur les grandeurs, due au frottement de sable ou aux fortes poussières dans l'air ambiant...
¨¨¨¨¨¨ - Vaucluse - - Compy300 - - Atom 500 - ¨¨¨¨¨¨
----------------- Hitec Aurora 9X Mode2- -Héli-X 6.1-
----------------------------The Meeting Heli4 2013/14/15..., j'y étais!!! ------------------------------
----------------- Hitec Aurora 9X Mode2- -Héli-X 6.1-
----------------------------The Meeting Heli4 2013/14/15..., j'y étais!!! ------------------------------
- Stoparach
- Armageddon
- Messages : 19210
- Enregistré le : 13 déc. 2013, 20:04
- Localisation : Gignac-La-Nerthe
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Sur l'image ce qu'on voit je pense que c'est du sable irakien... Mais en fait l'air comprend un certain taux de poussière c'est inévitable. Sûr que l'hélico dans une tempête de sable ça doit flasher!!!
- Patrick66
- Armageddon
- Messages : 20536
- Enregistré le : 17 avr. 2012, 18:21
- Localisation : Torreilles (66)
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Superbe Yuri, bravo
KDS innova 450 SD FBL - Module Ebar - Spektrum DX9 / Photos & Vidéos
T-rex 500e PRO DFC - Module Ebar - Spektrum DX9 / Photos & Vidéos
T-rex 700e PRO DFC HV - Speed fuselage - Ebar V² - DX9 / Photos & Vidéos
Phoenix rc - TX Spektrum DX9 / Station de charge
T-rex 500e PRO DFC - Module Ebar - Spektrum DX9 / Photos & Vidéos
T-rex 700e PRO DFC HV - Speed fuselage - Ebar V² - DX9 / Photos & Vidéos
Phoenix rc - TX Spektrum DX9 / Station de charge
- Stoparach
- Armageddon
- Messages : 19210
- Enregistré le : 13 déc. 2013, 20:04
- Localisation : Gignac-La-Nerthe
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
C'est clair que ça fait envie...
Yuri is the best!!!
Yuri is the best!!!
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Yuri,
N'hésite pas à mettre des photos ici, c'est un peu ton chez toi ce post
Do not hesitate to post some pictures as much as you want, this post is yours.
N'hésite pas à mettre des photos ici, c'est un peu ton chez toi ce post
Do not hesitate to post some pictures as much as you want, this post is yours.
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
- Le Docteur
- Armageddon
- Messages : 20338
- Enregistré le : 06 mars 2011, 18:45
- Contact :
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Les mecs... faut y'aller plus fort
Yuri, if you're looking for test pilot, I'm you're man !
Yury, si tu cherches des pilotes de tests, je suis ton homme !
Yuri, if you're looking for test pilot, I'm you're man !
Yury, si tu cherches des pilotes de tests, je suis ton homme !
Bien Amicalement,
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Of course Yuri we can help you in order to test this beautiful CF700.
Bien sur Yuri, on peut t'aider à tester ton CF700.
Bien sur Yuri, on peut t'aider à tester ton CF700.
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
- fredolabidouille
- DETRAQUEUR
- Messages : 8984
- Enregistré le : 04 sept. 2013, 10:31
- Localisation : BRETAGNE
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
for sure ! I'm in too !!!
bien sûr ! j'en suis aussi !!!
bien sûr ! j'en suis aussi !!!
T-rex 150 - Blade 180 cfx - OXY3
GAUI X2.1 - GAUI X3 - GAUI X5
neXt - Devo 8s deViation
-------------------------------------------------------------------------
canopys T-rex150 viewtopic.php?f=252&t=57267&hilit=canop ... #p10183589
canopys 180CFX viewtopic.php?f=270&t=61721
-------------------------------------------------------------------------------------
-----------------------------the meeting Heli4 2015... j'y étais !!!--------------------------------------
-----------------------------the meeting Heli4 2016... j'y étais !!!-------------------------------------
- Yoy24
- Armageddon
- Messages : 23299
- Enregistré le : 29 juin 2010, 15:33
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Yop)
C'te blague...!!!
C'te blague...!!!
¨¨¨¨¨¨ - Vaucluse - - Compy300 - - Atom 500 - ¨¨¨¨¨¨
----------------- Hitec Aurora 9X Mode2- -Héli-X 6.1-
----------------------------The Meeting Heli4 2013/14/15..., j'y étais!!! ------------------------------
----------------- Hitec Aurora 9X Mode2- -Héli-X 6.1-
----------------------------The Meeting Heli4 2013/14/15..., j'y étais!!! ------------------------------
- fredolabidouille
- DETRAQUEUR
- Messages : 8984
- Enregistré le : 04 sept. 2013, 10:31
- Localisation : BRETAGNE
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
<_< "in english, please" !!!
............ mwahahahaha
ok, ----------->[]
............ mwahahahaha
ok, ----------->[]
T-rex 150 - Blade 180 cfx - OXY3
GAUI X2.1 - GAUI X3 - GAUI X5
neXt - Devo 8s deViation
-------------------------------------------------------------------------
canopys T-rex150 viewtopic.php?f=252&t=57267&hilit=canop ... #p10183589
canopys 180CFX viewtopic.php?f=270&t=61721
-------------------------------------------------------------------------------------
-----------------------------the meeting Heli4 2015... j'y étais !!!--------------------------------------
-----------------------------the meeting Heli4 2016... j'y étais !!!-------------------------------------
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Non on est sérieux...Yoy24 a écrit :Yop)
C'te blague...!!!
We are the serious team.
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
- Yoy24
- Armageddon
- Messages : 23299
- Enregistré le : 29 juin 2010, 15:33
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Ha Ok In iglich:
When the seagulls turn around the boat,
is that going to be the fish thrown into the sea ... !!!
When the seagulls turn around the boat,
is that going to be the fish thrown into the sea ... !!!
¨¨¨¨¨¨ - Vaucluse - - Compy300 - - Atom 500 - ¨¨¨¨¨¨
----------------- Hitec Aurora 9X Mode2- -Héli-X 6.1-
----------------------------The Meeting Heli4 2013/14/15..., j'y étais!!! ------------------------------
----------------- Hitec Aurora 9X Mode2- -Héli-X 6.1-
----------------------------The Meeting Heli4 2013/14/15..., j'y étais!!! ------------------------------
- fabu74
- Armageddon
- Messages : 16340
- Enregistré le : 10 août 2013, 09:26
Re: Takumi 700CF Par Yuri Katom, Posts du concepteur inside
Very good Yoy. C'est très bien Yoy.
En électrique: M1, M2, Logo 200, Blade 180CFX, Huey SR, Trex 150s, Trex250, Oxy2, Oxy3, Oxy4 ,Oxy4 Max, Oxy5 meg, Trex500s, Trex550, Blade550Xs, Trex 600, Trex 700s, Fireball, Mini-Comet, G380s, G500s, Kraken 580, G630 et G630C, G700Cs, SPEED, Comet, Kraken 700, Raw 700, Forza 700s, Rush 750 , MD7-8, Protos 700 V2, Alzrc Fast 380, 6 HVu, XL Evo380, XL 480, XL 550, XL 700, Radio Spektrum DX9, VBAR CONTROL + TOUCH, TX16S
OXY rep/Lynx team pilot
OXY rep/Lynx team pilot
Qui est en ligne
Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 1 invité